2011/03/07 Version 3.4.0u1
OpenGearのCM4008は、Serial Consoleシステムとしてかなり優秀であるといえる。
元々はCisco2511を使っていたのだが、こいつはDis-Conになった。後継機がCisco2600シリーズとして作れなくはないが、これは高い。
PC/ATでも作ろうと思えば作れるんだが、5万円で買えるし、これを選択しない理由はないだろう。
ちなみに、FirmwareはLinuxであって、その気になれば色々自分でいじれそうだ。
項目 | 内容 | 数量 |
Serial Port | RJ-45 | 8 port |
Console Port | RS-232C | 1 port |
Network Port | 10/100M Ether RJ-45 | 1 port |
初期 ID | root | |
Password | default | |
初期 Addr | 192.168.0.1 | |
初期設定URL | https://192/168.0.1 | |
Vendor Page | http://www.opengear.com/ |
これで、初期設定になるので、Web(HTTPs)やSSHでloginできる。
これでFirmwareの更新は終了
CM4008は機能が多く(シリアルコンソールだけで無く、Nagiosも入っているので、稼動監視などもできる)、その機能の特性上セキュリティ的に十分に保護する必要がある。 というわけで、初期設定はしっかり行う必要がある。
Change the default administration password on the System/Administration page.
をクリックConfigure the local network settings on the System/IP page.
をクリックConfigure serial ports settings and enable supported protocols on the Serial & Network/Serial Port page.
をクリックEdit Multiple Ports
をクリックConfigure users with access to serial ports on the Serial & Network/Users page.
をクリックやはり最低限でもSecurity関連の設定はしておくべきであろうということで。
Set Timezone
をクリックSet Time
をクリックApply Settings
をクリックするSerial Port
もしくはNetwork Host
で設定して、RPC Connectionsを利用