Last Update: 2015/11/19
/etc/my.cnf.d/server.cnf
を修正。/usr/local/etc/my.cnf
を作成。CentOSと同じように、my.cnf.dをつくってmy.cnfから読むようにしても良い[mysqld]
セクションにcharacter-set-server=utf8
をとにかく足すmysql_enable="YES" mysql_limits="NO" mysql_dbdir="any/where"
mysql_secure_installation
を実行して、root password等の設定を行うmysql_install_db
scriptを実行すること。/usr/local/bin/mysql_install_db –basedir=/usr/local –datadir=…
[foo@bar ~]$ sudo mysql_secure_installation /usr/bin/mysql_secure_installation: line 379: find_mysql_client: コマンドが見つかりません NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY! In order to log into MariaDB to secure it, we'll need the current password for the root user. If you've just installed MariaDB, and you haven't set the root password yet, the password will be blank, so you should just press enter here. Enter current password for root (enter for none): OK, successfully used password, moving on... Setting the root password ensures that nobody can log into the MariaDB root user without the proper authorisation. Set root password? [Y/n] y New password: **************** Re-enter new password: **************** Password updated successfully! Reloading privilege tables.. ... Success! By default, a MariaDB installation has an anonymous user, allowing anyone to log into MariaDB without having to have a user account created for them. This is intended only for testing, and to make the installation go a bit smoother. You should remove them before moving into a production environment. Remove anonymous users? [Y/n] y ... Success! Normally, root should only be allowed to connect from 'localhost'. This ensures that someone cannot guess at the root password from the network. Disallow root login remotely? [Y/n] y ... Success! By default, MariaDB comes with a database named 'test' that anyone can access. This is also intended only for testing, and should be removed before moving into a production environment. Remove test database and access to it? [Y/n] y - Dropping test database... ... Success! - Removing privileges on test database... ... Success! Reloading the privilege tables will ensure that all changes made so far will take effect immediately. Reload privilege tables now? [Y/n] y ... Success! Cleaning up... All done! If you've completed all of the above steps, your MariaDB installation should now be secure. Thanks for using MariaDB! [foo@bar ~]$
mysql -u root -p
(コマンド名がmysqlなので注意すること)MariaDB [(none)]> \s -------------- mysql Ver 15.1 Distrib 5.5.34-MariaDB, for Linux (x86_64) using readline 5.1 Connection id: 10 Current database: Current user: root@localhost SSL: Not in use Current pager: stdout Using outfile: '' Using delimiter: ; Server: MariaDB Server version: 5.5.34-MariaDB MariaDB Server Protocol version: 10 Connection: Localhost via UNIX socket Server characterset: utf8 Db characterset: utf8 Client characterset: utf8 Conn. characterset: utf8 UNIX socket: /var/lib/mysql/mysql.sock Uptime: 18 min 7 sec Threads: 1 Questions: 28 Slow queries: 0 Opens: 1 Flush tables: 2 Open tables: 27 Queries per second avg: 0.025 -------------- MariaDB [(none)]>
MariaDB [(none)]> show plugins; +--------------------------------+----------+--------------------+---------+---------+ | Name | Status | Type | Library | License | +--------------------------------+----------+--------------------+---------+---------+ | binlog | ACTIVE | STORAGE ENGINE | NULL | GPL | | mysql_native_password | ACTIVE | AUTHENTICATION | NULL | GPL | | mysql_old_password | ACTIVE | AUTHENTICATION | NULL | GPL | | CSV | ACTIVE | STORAGE ENGINE | NULL | GPL | | MEMORY | ACTIVE | STORAGE ENGINE | NULL | GPL | | MyISAM | ACTIVE | STORAGE ENGINE | NULL | GPL | | MRG_MYISAM | ACTIVE | STORAGE ENGINE | NULL | GPL | | BLACKHOLE | ACTIVE | STORAGE ENGINE | NULL | GPL | | InnoDB | ACTIVE | STORAGE ENGINE | NULL | GPL | | INNODB_RSEG | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_UNDO_LOGS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_TRX | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_LOCKS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_LOCK_WAITS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_CMP | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_CMP_RESET | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_CMPMEM | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_CMPMEM_RESET | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_TABLES | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_TABLESTATS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_INDEXES | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_COLUMNS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_FIELDS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_FOREIGN | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_FOREIGN_COLS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_SYS_STATS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_TABLE_STATS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_INDEX_STATS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_BUFFER_POOL_PAGES | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_BUFFER_POOL_PAGES_INDEX | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_BUFFER_POOL_PAGES_BLOB | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | XTRADB_ADMIN_COMMAND | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_CHANGED_PAGES | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_BUFFER_PAGE | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_BUFFER_PAGE_LRU | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | INNODB_BUFFER_POOL_STATS | ACTIVE | INFORMATION SCHEMA | NULL | GPL | | FEDERATED | ACTIVE | STORAGE ENGINE | NULL | GPL | | ARCHIVE | ACTIVE | STORAGE ENGINE | NULL | GPL | | PERFORMANCE_SCHEMA | ACTIVE | STORAGE ENGINE | NULL | GPL | | Aria | ACTIVE | STORAGE ENGINE | NULL | GPL | | FEEDBACK | DISABLED | INFORMATION SCHEMA | NULL | GPL | | partition | ACTIVE | STORAGE ENGINE | NULL | GPL | +--------------------------------+----------+--------------------+---------+---------+ 42 rows in set (0.00 sec) MariaDB [(none)]>
ここまでできたら、MariaDBは動作している状態になる。
/etc/my.cnf.d/server.cnf
の [mysqld]
セクションに以下を追加plugin-load = handlersocket.so;semisync_master.so;semisync_slave.so
;
の前後に
(スペース)等を入れてはいけません。(はまる)$ mysql -u root -p MariaDB [(none)]> grant all privileges on *.* to foo@localhost identified by 'DB Ultra Secret'; Query OK, 0 rows affected (0.00 sec) MariaDB [(none)]> grant all privileges on *.* to foo@127.0.0.1 identified by 'DB Ultra Secret'; Query OK, 0 rows affected (0.00 sec) MariaDB [(none)]> grant all privileges on *.* to foo@::1 identified by 'DB Ultra Secret'; Query OK, 0 rows affected (0.00 sec) MariaDB [(none)]> flush privileges; Query OK, 0 rows affected (0.00 sec)
再起動時にMariaDBが動作するようにする。
chkconfig mysql on
mysql_enable="YES" mysql_limits="NO" mysql_dbdir="/var/db/mysql"
# # /etc/my.cnf.d/server.cnf # # Configuration for MariaDB server. # # this is read by the standalone daemon and embedded servers [server] # this is only for the mysqld standalone daemon [mysqld] user=mysql datadir=/var/lib/mysql/DB # datadir=/var/db/mysql bind-address=127.0.0.1 character-set-server=utf8 #skip-character-set-client-handshake skip-name-resolve expire_logs_days=7 #log_output="NONE" log_output="FILE" #log_output="FILE,TABLE" #general-log=0 general-log=1 general-log-file=/var/lib/mysql/log/mysql #general-log-file=/var/db/mysql/log/mysql log_error=/var/lib/mysql/log/mysql-error #log_error=/var/db/mysql/log/mysql-error #slow_query_log=0 slow_query_log=1 slow_query_log_file = /var/lib/mysql/log/mysql-slow.log #slow_query_log_file = /var/db/mysql/log/mysql-slow.log max_binlog_size=100M sync_binlog=1 binlog_format=mixed log_bin=/var/lib/mysql/log/mysql-bin #log_bin=/var/db/mysql/log/mysql-bin relay_log=/var/lib/mysql/log/mysql-relay relay_log=/var/db/mysql/log/mysql-relay log_slave_updates key_buffer_size = 384M max_allowed_packet = 1M table_open_cache = 512 sort_buffer_size = 2M read_buffer_size = 2M read_rnd_buffer_size = 8M myisam_sort_buffer_size = 64M thread_cache_size = 8 query_cache_size = 32M thread_concurrency = 8 innodb_buffer_pool_size = 768M innodb_log_file_size = 128M innodb_log_buffer_size = 32M innodb_flush_log_at_trx_commit = 1 innodb_support_xa=1 innodb_log_files_in_group = 7 innodb_autoextend_increment=64 innodb_file_per_table plugin-load = handlersocket.so;semisync_master.so;semisync_slave.so #rpl_semi_sync_master_enabled =1 #rpl_semi_sync_slave_enabled = 1 #rpl_semi_sync_master_timeout=30 # this is only for embedded server [embedded] # This group is only read by MariaDB-5.5 servers. # If you use the same .cnf file for MariaDB of different versions, # use this group for options that older servers don't understand [mysqld-5.5] # These two groups are only read by MariaDB servers, not by MySQL. # If you use the same .cnf file for MySQL and MariaDB, # you can put MariaDB-only options here [mariadb] [mariadb-5.5]
なお、この設定では、SQL Queryのlogや、slow logも収集するようになっているので、必要に応じてOffにすること。
このままでは性能が劣化します。
slow-logを取得する際には、mysql-slow をtouchすること
加えて、うかつにinnodb_log_buffer_sizeやinnodb_log_files_in_groupを書き換えると起動しなくなります。 そういう場合には、http://gitpub.hatenablog.com/entry/2013/08/02/001600を参照して作業すること。